ZF Hydraulic & Pneumatic parts Co., Ltd

ZF Hydraulic & Pneumatic parts Co., Ltd

进入中文版  中文版 进入英文版  ENGLISH
Contact Us

Name: Mr William
Tel: 86-135-09210189
Fax: +86-0755-66813786
Mobile: +86-13509210189
E-mail: zfhydraulic@hotmail.com
E-mail: sales@zfhydraulic.com
Add: 4/F, Bldg. 3, Anhua Industrial Zone, Area 35, Xin'an St., Baoan Dist, Shenzhen, Guangdong Province, China
Skype: zfhydraulic
MSN: zfhydraulic@hotmail.com
QQ: 2542600020
MSN: zfhydraulic@hotmail.com Skype: zfhydraulic QQ: 2542600020

How to disassemble axial piston pump

Author : FA Date : 2/12/2020 8:42:12 PM
How to disassemble axial piston pump

Axial piston pump is a kind of mechanical equipment which adopts the movement form of flow distribution on the end face and cylinder body rotation to realize the operation of the pump body. Sometimes in the use of axial piston pump there will be a fault, these faults sometimes only need to be dismantled the piston pump can be solved, so how to dismantle the axial piston pump, the following small make up to take you to understand.
 
 
First in the dismantling of the axial piston pump, the first to remove the variable mechanism, take out the swash plate, plunger, pressure plate, sleeve, spring, ball, pay attention not to damage, look at the layout of the characteristics, understand their respective effects. Then slightly knock the pump body, take out the cylinder body, take off the bolt and leave the pump body for the central pump body and the front pump body, pay attention to see, explain its layout characteristics, make clear their respective influence, pay special attention to the distribution of the flow disk layout, influence. When installing the device, first install the central pump body and the front pump body, pay attention to install the distribution plate, and then install the spring, sleeve, steel ball, pressure plate, plunger; Install the swash plate in the variable mechanism, and finally connect the pump body with the variable mechanism with bolts. In the process of the device, to comply with the first parts of the device after the device, after the first parts of the device, after the end of the device should make the spline shaft to mobilize the cylinder block migration and mobility, no signs of stuck.

The above: Precautions for use of gear pump